Home Exterior Driveway Paving: Brick VS Concreting?

Driveway Paving: Brick VS Concreting?


It’s time for revamping the entire home décor and let’s not ignore the very entering home space this time. We usually focus on the interiors of our homes but forget to make the outdoors equally catchy. Although they need more care and attention for maintenance, driveways usually are neglected.

Driveway is the entrance space, made to avoid clogging the roads with traffic, leading to a garage. Since it has to bear much of foot traffic as well as vehicle weight, the driveways tend to be made of a material that can withstand pressure. From asphalt to concrete, a number of material choices are available to install a smooth driveway. Each carrying its own specifications, the material selection is of utmost importance. These days you might have witnessed the fashion of driveway paving, using stones, to make the driveways more attractive, durable and strong. The use of bricks and concrete is increasingly popular for this purpose. Below is a comparative analysis to guide about the pros and cons of using brick or concrete paving.

Brick Paving

Made of clay, brick paving is one of the oldest methods for construction of buildings. Being the most reliable, bricks are considered a preferable choice for driveway installations too. The underlying base of this type of paving is laid down with sand or mortar followed by a layer of heat treated bricks. Brick paving is used commonly for pedestrian walkways and has the ability to endure a lot of pressure. Being naturally colored, it has the ability to retain color even under constant exposure to sunlight or UV rays. In case of damage, the chipped or broken bricks can be replaced easily with the new ones. Brick paving is perceived to be long lasting and ageless. The most distinctive feature is its eco-friendly nature as bricks are made up of all natural materials.

But modern driveway paving experts don’t consider it much of a useful option particularly in the long run. From installation to maintenance, its overall costs very expensive. Since they are hard to be cut and placed, the cost of labor increases at the very first place. Over time, bricks are more prone to damage which definitely demands to be repaired. Also, the gaps among the bricks cause weeds to outgrow. In terms of color and size, bricks do not offer much variety. Though it stays longer with you but every passing year will cost you more. Hence, brick paving is more an expanse than an investment.

Concrete Paving

Concrete paving is the most widely used driveway material today. Composed of cement, either poured or stamped, concrete paving can be seen for driveways, walkways, and playgrounds commonly. Easy installation, less costs and fewer chances of damage are just a few features of concrete to start with. A vast variety in terms of shapes, colors, size, and patterns make them a unique choice for homeowners. The concrete pavers are easy to install thus charge minimally for labor. Since it is easy to be cut and placed and therefore makes it a DIY activity saving you the labor cost even. The raw materials used like cement, sand, and water are not that costly. This also makes the cost of concrete paving lesser than bricks. Comparing even with the concrete slabs, the pavers are more durable.

Unlike bricks, concrete pavers can’t be used instantly after installation as it requires more time for drying. Though chipping is not frequent, it is visible as ugly patches. Hence it makes replacement essential which is not an easy job. Concrete paving is not a lifelong material, thus lasts for 15-20 years only.

The comparison of brick vs concrete paving provided here can be a useful guide for the probable users who are still thinking which material to go for. The key to a better selection of material depends on the cost, durability and the ambiance you desire for.